The second shaping video in the DIY Climbing Hold series where we fill in the hold set and add a new crimp to the mix of shapes. We also start to prep for the production stage by adding in bolt holes and set screw placements.
Here is the previous video/part two of this series
…or check out all the posts/videos in this series
Here is the next video/part four of this series
If you haven’t seen our wall build series so far/you want a wall to make some holds for, you can find it here.
🛒 DIY Climbing Hold Materials:
*Resin
*Mold making materials – I used a different product in the video
*Mold Release
*All in one kit (low volume)
*Resin Dyes
*Large Stir Sticks
*Small Stir Sticks
*Measuring Cups
*Gram Scale
*All Climbing Products
ONE-TIME 10% OFF COUPON CODE: sendstory10
*Foam for shaping
*Alt. Mold Release
🛒 Shaping Tools/Other Items:
*Climbing Bolts
*Box Cutter
*Varied Rasps
*Sanding Foam/Sponge
*Assorted Grit Sand Paper
*Hot Glue + Gun
*Compressed Air
🛒 Climbing Wall Materials:
*Climbing Bolts
*T-Nuts
*These are affiliate links that help us out. Thanks!
https://www.patreon.com/SendStory
We plan on continuing to post more content to our youtube channel and instagram account so if you are interested in following along, please like and subscribe for more!